Store
-
JK HSS Drill Inches Parallel Shank Bit
Price range: ₹11.50 through ₹453.00 +GSTStandard straight shank ground flute drills for general purpose application on steel and cast steel, alloyed and non-alloyed, grey cast iron, German silver steel, graphite, etc.
Select options This product has multiple variants. The options may be chosen on the product page -
Taparia 829 Flat Screw Driver
Original price was: ₹97.00.₹72.75Current price is: ₹72.75. +GST- The blade is made from high grade Silicon – Manganese steel which no other make uses.
- This steel gives spring effect also.
- The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement.
- Other makes offer same hardness through out the length of the blade, which is not scientific.
-
Dewalt Angle Grinder 5″ DW831
₹5,250.00 +GST- 12.0 Amp AC/DC, 10,000 rpm motor provides high speed for fast material removal
- High power-to-weight ratio for greater efficiency and reduced user fatigue
- Adjustable guard can be adjusted to redirect sparks away from user
- Rear handle design for greater comfort and control
- Sealed ball and roller bearings for extended motor life
-
Sharp Bi-Metal Hole Saw Cutter
Price range: ₹154.00 through ₹539.00 +GSTStd. H.S.S. hole saws are used for cutting clear finish holes in wood, plaster slate, fibre, plastics, metal sheet of aluminium, brass etc.
Select options This product has multiple variants. The options may be chosen on the product page -
Bosch Metal Cutting Jigsaw Blade T118A
Original price was: ₹50.00.₹30.00Current price is: ₹30.00. +GST- 5 piece pack
- For sheet metal 10-16 gauge, thin metals 1/16 In. to 1/8 In. thick (ferrous and non-ferrous)
- 17-24 TPI progressive tooth design for smooth cuts in various thicknesses
- High-speed steel construction for maximum life in straight cuts
- 3-5/8 In. overall length, 2-5/8 In. working length
-
Disposable Transparent Plastic Safety Gloves (100 Pcs.)
Original price was: ₹60.00.₹50.00Current price is: ₹50.00. +GST- These polythene gloves are powder free to reduce potential dust and contamination. These gloves are very smooth for improved feel.
- These gloves are latex free also, therefore reducing the risk of hypersensitivity and allergic reactions to the skin.
- Universal size fits both left & right hands as both sides are same
-
Taparia 825 Flat Screw Driver
Original price was: ₹60.00.₹45.00Current price is: ₹45.00. +GSTThe blade is made from high grade Silicon – Manganese steel which no other make uses.
This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement.
Other makes offer same hardness through out the length of the blade, which is not scientific. -
Taparia 713 Flat Screw Driver
Original price was: ₹43.00.₹32.25Current price is: ₹32.25. +GSTThe blade is made from high grade Silicon – Manganese steel which no other make uses.
This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement.
Other makes offer same hardness through out the length of the blade, which is not scientific. -
Taparia 712 Flat Screw Driver
Original price was: ₹36.00.₹27.00Current price is: ₹27.00. +GSTThe blade is made from high grade Silicon – Manganese steel which no other make uses.
This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement.
Other makes offer same hardness through out the length of the blade, which is not scientific. -
Taparia 913 Flat Screw Driver
Original price was: ₹40.00.₹30.00Current price is: ₹30.00. +GSTThe blade is made from high grade Silicon – Manganese steel which no other make uses.
This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement.
Other makes offer same hardness through out the length of the blade, which is not scientific. -
JK HSS Stub Series Drill Bit
Price range: ₹12.67 through ₹14.56 +GSTStandard straight shank ground flute drills. recommended for use with hand drilling machine in drilling thin sections, sheet metals, car and bus bodies, etc.
Select options This product has multiple variants. The options may be chosen on the product page -
Dewalt Angle Grinder 100mm DW810
Original price was: ₹2,429.00.₹1,795.00Current price is: ₹1,795.00. +GST- 800W, 10,000 rpm provides high power and speed for 100mm grinding applications
- Advanced fan system provides maximum airflow prolonging motor life
- Sealed toggle switch provides protection from dust and filings extending switch life
- Tool-free adjustable guard allows easy positioning for left or right handed use
- Spindle lock for quick and easy disc changes
- Compact gear case allows use in tight and confined areas
- Accessible brushes for easy brush replacement and less downtime
-
Taparia 902 Flat Screw Driver
Original price was: ₹35.00.₹26.25Current price is: ₹26.25. +GSTThe blade is made from high grade Silicon – Manganese steel which no other make uses.
This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement.
Other makes offer same hardness through out the length of the blade, which is not scientific. -
Stanley Steel Handle Claw Hammer
Price range: ₹157.08 through ₹271.32 +GST- Shaft 15% longer for better balance and control
- Grip 15% longer for better performance
- Individually heat-treated for long life
- Hardened and tempered tubular steel shaft for strength
- Flock filled rubber grip for comfort and durability
- Meet ANSI Standards
Select options This product has multiple variants. The options may be chosen on the product page -
Taparia Cross Pein Hammer With Handle
Price range: ₹132.75 through ₹266.25 +GST- Available in ball pein and claw version.
- Head drop forged made from high grade steel.
- Head differentially heat treated to ensure safe use.
Select options This product has multiple variants. The options may be chosen on the product page -
Bosch Angle Grinder GWS 6-125 Professional
Original price was: ₹5,160.00.₹2,675.00Current price is: ₹2,675.00. +GST- Flat gear head for working in tight spaces
- Gear head can be rotated in 90° steps
- Armoured coils that protect the motor against sharp grinding dust ensure long lifetime
- Anti-rotation protective guard – easily adjustable, provides reliable protection
- Cut-out carbon brushes
- Handle can be used on right or left
- Safety switch
- Suitable for SDS quick-locking nut (special accessory)
-
Taparia 842 Flat Screw Driver
Original price was: ₹35.00.₹26.25Current price is: ₹26.25. +GSTThe blade is made from high grade Silicon – Manganese steel which no other make uses.
This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement.
Other makes offer same hardness through out the length of the blade, which is not scientific. -
Stanley 2 Way T-Handle Allen Key
Price range: ₹202.00 through ₹292.00 +GST- Using Advanced Alloy Steel S2.
- Hardness HRC60 ± 2, 20 percent higher torque than chrome vanadium steel.
- Sand Ding Ni surface treatment, beautiful wearable.
- Dual material handle, feel comfortable, effective non-slip
Select options This product has multiple variants. The options may be chosen on the product page -
Taparia Allen Key Set (inch size)
Original price was: ₹192.00.₹144.00Current price is: ₹144.00. +GSTTAPARIA Allen keys are:-
- Made from expensive high grade alloy steel.
- Accurately hardened and tempered to withstand higher torque and enable high wear resistance.
- Available in brown & black finish.
- Offered in loose as well as in sets.
- One of the widest range of allen keys in India.
-
Taparia Ball Pein Hammer With Handle
Price range: ₹100.50 through ₹266.25 +GST- Available in ball pein and claw version.
- Head drop forged made from high grade steel.
- Head differentially heat treated to ensure safe use.
Select options This product has multiple variants. The options may be chosen on the product page -
Bosch Rotary Hammer Drill GBH 2-22 E Professional
Original price was: ₹16,120.00.₹7,603.00Current price is: ₹7,603.00. +GST- Impact stop for drilling in wood and steel
- Ergonomically designed softgrip handle with long trigger variable speed control
- Auxiliary handle with adjustable depth stop can be rotated 360°
-
Sharp TCT Hole Saw Cutter 76 mm
Original price was: ₹2,400.00.₹1,680.00Current price is: ₹1,680.00. +GSTCharacteristic: • Easy drilling in work materials of up to 4 mm (5/32”) thickness • By attaching this tool to an electric drill with high rotational speed, much faster drilling is possible compared to high speed steel cutters
-
Sharp TCT Hole Saw Cutter 54 mm
Original price was: ₹1,700.00.₹1,190.00Current price is: ₹1,190.00. +GSTCharacteristic: • Easy drilling in work materials of up to 4 mm (5/32”) thickness • By attaching this tool to an electric drill with high rotational speed, much faster drilling is possible compared to high speed steel cutters
-
Sharp TCT Hole Saw Cutter 51 mm
Original price was: ₹1,600.00.₹1,120.00Current price is: ₹1,120.00. +GSTCharacteristic: • Easy drilling in work materials of up to 4 mm (5/32”) thickness • By attaching this tool to an electric drill with high rotational speed, much faster drilling is possible compared to high speed steel cutters
-
Sharp TCT Hole Saw Cutter 44 mm
Original price was: ₹1,380.00.₹966.00Current price is: ₹966.00. +GSTCharacteristic: • Easy drilling in work materials of up to 4 mm (5/32”) thickness • By attaching this tool to an electric drill with high rotational speed, much faster drilling is possible compared to high speed steel cutters
-
Sharp TCT Hole Saw Cutter 38 mm
Original price was: ₹1,200.00.₹840.00Current price is: ₹840.00. +GSTCharacteristic: • Easy drilling in work materials of up to 4 mm (5/32”) thickness • By attaching this tool to an electric drill with high rotational speed, much faster drilling is possible compared to high speed steel cutters
-
Sharp TCT Hole Saw Cutter 35 mm
Original price was: ₹1,100.00.₹770.00Current price is: ₹770.00. +GSTCharacteristic: • Easy drilling in work materials of up to 4 mm (5/32”) thickness • By attaching this tool to an electric drill with high rotational speed, much faster drilling is possible compared to high speed steel cutters
-
Sharp TCT Hole Saw Cutter 32 mm
Original price was: ₹1,010.00.₹707.00Current price is: ₹707.00. +GSTCharacteristic: • Easy drilling in work materials of up to 4 mm (5/32”) thickness • By attaching this tool to an electric drill with high rotational speed, much faster drilling is possible compared to high speed steel cutters
